TRANSCEIVER

Product Details:

GENERAL SPECIFICATIONS-
- Frequency coverage Transmit 156-157.5 MHzReceive 156-163 MHz
- Usable channels All U.S.A., International andCanadian channels plus 10weather channels
- Mode 16K0G3E, (16K0G2B whenoptional DSC is in use)
- Power supply requirement 13.8 V DC +- 15%
- Current drain Transmit(at 13.8 V DC) high power 6.0 Alow power 1.5 AReceivestandby 350 mAmax. audio output 1.2 A
- Frequency stability +- 10 ppm
- Usable temp. range -20 DegreeC to +60 DegreeC;-4 DegreeF to +140 DegreeF
- Dimensions 140(W) x 55(H) x 155(D) mm(projections not included) 51???2(W) x 25???32(H) x 63???32(D) in
- Weight 1.0 kg; 2.2 lb
Transmitter-
- Output power High 25 W Low 1 W
- Modulation system Variable reactance phasemodulation
- Max. frequency deviation +-5.0 kHz
- Spurious emissions Less than -70 dB
- Microphone impedance 600 ??
Receiver-
- Receive system Double conversionsuperheterodyne
- Intermediate frequencies 1st 21.8 MHz 2nd 455 kHz
- Sensitivity 0.22 ??V (typical) for 12 dB SINAD
- Squelch sensitivity 0.18 ??V at threshold
- Adjacent channel More than 70 dBselectivity
- Spurious reponse More than 70 dBrejection
- Intermodulation rejection More than 70 dB
- Audio output power 3.5 W at 10% distortion
- Audio output impedance 4 ??All stated specifications are subject to change without notice orobligation

Product Details:

RODUCT NAME :- NAVTEX RECEIVER NAVTEX
RECEIVER:-

• Receiving Frequency 518 kHz and 490 or 4209.5 kHz
• Mode of Reception F1B
• Sensitivity 2 μV e.m.f. (50 ohms), 4% error rateInput Protection Withstands 30 Vrms for 15 min or more (w/ preamp unit)
• Spurious Emission 1 nW or less

Message Category

1. A : Navigation warning
2. B : Meteorological warning
3. C : Ice report
4. D : Search and rescue information/ piracy and armed robbery
5. E : Meteorological forecast
6. F : Pilot message
7. G : AIS
8. H : Loran-C message
9. I : reserved presently not used
10. J : SATNAV message
11. K : Other electronic navigational aid and system message
12. L : Navigational warning (additional)
13. M to Y: Reserved - presently not used
14. V : Notice to Fishermen (US only)
15. Z : QRU (no message on hand)

Product Details:

General Specifications-
Complies with AS/NZS4415.2.2003

• Frequency Range 155-165MHz
• Channel Spacing 25kHzModulation FM
• Channels Sets International,USA,Canada ,Private-10channels , USAweatherchannels -Customer weather channels
• Supply Voltage 12V oltnominal ,10.5-15.6voltmax.range Negativ
• eearthFrequency Stability+-1.5kHzoverenvironmentextremesScan Speed100ms/channel(10channels/sec)

FEATURES-
-CompactIP67Design
-Selectable International,USA,and Canadian Channel Sets
-Selectable USA Weather Channels
-DualWatch and Triple Watch with Programmable PriorityChannel
-10PrivateChannelsavailable
-Programmable Channel Scanning
-SelectablePower25/1watt
-Two Working Channel Memories
-Adjustable Digital Squelc

Product Details:

FEATURES:-

• Built-in floating type power supply.
• One-touch emergency frequency access capability.
• Alaram signal transmission.
• 160-m band transmission
• Full 150W output power.
• Excellent frequency stability.
• Direct digital Synthesizer (DDS) for all rapid lockup time & high quality frequency oscillation.
• Convinent frequency selection via keyboard entry or rotation of the main dial.
• Clarity control for up to 150Hz in 10 Hz steps.
• 99 user programmable memory channels.
• 314 ITU channels.
• Cross channel operation.
• General coverage Reciever.
• splash-resistant front pannel.
• keyboard and function display backlighting.
• Audio activated squlch.
• Noise blankar circut.
• Automatic Gain Control (AGC) circut.
• 7-step FR gain control.
• Accpets an optional AT-120E HF Automatic Antenna Tuner.

Product Details:

GENERAL:-Frequency coverage : Transmit 156.025–157.425 MHzReceive 156.050–163.275 MHzMode : FM (16K0G3E)Channel spacing : 25 kHzCurrent drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical.Max. audio 200 mA typicalPower save 20 mA typicalFrequency stability : ±10 ppm (–20°C to +60°C)Useable temperature range : –20°C to +60°C; –4°F to +140°FDimensions : 61 (W) ´ 135(H) ´ 41(D) mm(Projections not included) 213⁄32(W) ´ 55⁄16(H) ´ 15⁄8(D) inchWeight (approx.; with BP-224) : 360g (12.7 oz) TRANSMITTER:-Output power (at 7.5 V DC) : 5 W (Hi), 3 W (Mid) and 1 W (Low)Modulation system : Variable reactance frequency modulationMax. frequency deviation : ±5 kHzAudio harmonics distortion : Less than 10 % (at 60 % mod.)Spurious emissions : Less than –65 dBcRECEIVER:-Receive system : Double-conversion superheterodyneSensitivity (12 dB SINAD) : 0.25 μV typicalSquelch sensitivity : Less than 0.35 μV (at threshold)Intermodulation rejection ratio : 70 dB typicalSpurious response rejection ratio : 70 dB typicalAdjacent channel selectivity : 70 dB typicalHam and noise ratio : More than 40 dBAudio output power : 0.35 W typical at 10% distortion with an8 ½ loadAll stated specifications are subject to change without notice or obligation.

Product Details:

GENERAL SPECIFICATIONS:-

• Frequency range (Unit: MHz) :*1 Guaranteed range 144–148MHz*2 Guaranteed range 144–146MHz
• Mode : FM, AM (Rx only)
• No. of memory channels : 207 (including 6 scan edges,and 1 call channel)
• Operating Temp. range : –10°C to +60°C;+14°F to +140°F
• Frequency stability : ±10ppm (–10°C to +60°C)
• Power supply requirements: 13.8V DC ±15%
• Current drain (at 13.8V DC) :Tx High (65W) 15ARx Max. audio 1.0AStandby 0.8A
• Antenna impedance : 50Ω (SO-239)
• Weight (approx.) : 1.25kg; 2.75lb

TRANSMITTER:-
 • Output power (* approx.) : 65, 25*, 10*, 5*W selectableKorea version 50, 25*, 10*, 5*W selectableTaiwan version 24, 10*, 5*W selectable
• Maximum frequency : ±5.0/±2.5kHzdeviation (wide/narrow)
• Spurious emissions : –70dBc typical.
• Microphone connector : 8-pin modular (600Ω)

RECEIVER:- 
• Receive system : Double-conversionsuperheterodyne
• Intermediate frequencies : 1st 21.7MHz2nd 450kHz
• Sensitivity (at 12dB SINAD) : 0.133μV typical
• Squelch sensitivity : 0.100μV typical (threshold)
• Selectivity :Wide More than 6kHz at –6dBLess than 14kHz at –60dBNarrow More than 3kHz at –6dBLess than 9kHz at –55dB
• Spurious and image rejection : More than 60dB
• Audio output power : More than 2.4W at 10%(at 13.8V DC) distortion with an 8Ω load
• External speaker connector: 3-conductor 3.5 (d) mm (1⁄8")/8Ω

Product Details:

GENERAL:-

• Frequency coverage : Transmit 156.025–157.425 MHz

Receive 156.050–163.275 MHz

• Mode : FM (16K0G3E)
• Channel spacing : 25 kHz
• Current drain (at 7.5 V DC) : TX High (5 W) 1.5 A typical.

Max. audio 200 mA typicalPower save 20 mA typical

• Frequency stability : ±10 ppm (–20°C to +60°C)
• Ustable temperature range : –20°C to +60°C; –4°F to +140°F
• Dimensions : 61 (W) ´ 135(H) ´ 41(D) mm

(Projections not included) 213⁄32(W) ´ 55⁄16(H) ´ 15⁄8(D) inch

• Weight (approx.; with BP-224) : 360g (12.7 oz)

TRANSMITTER:-

• Output power (at 7.5 V DC) : 5 W (Hi), 3 W (Mid) and 1 W (Low)
• Modulation system : Variable reactance frequency modulation

Max. frequency deviation : ±5 kHz

• Audio harmonics distortion : Less than 10 % (at 60 % mod.)
• Spurious emissions : Less than –65 dBc

RECEIVER:-

• Receive system : Double-conversion superheterodyne
• Sensitivity (12 dB SINAD) : 0.25 μV typical
• Squelch sensitivity : Less than 0.35 μV (at threshold)
• Intermodulation rejection ratio : 70 dB typical
• Spurious response rejection ratio : 70 dB typical
• Adjacent channel selectivity : 70 dB typical
• Ham and noise ratio : More than 40 dB
• Audio output power : 0.35 W typical at 10% distortion with an 8 ½ load
• All stated specifications are subject to change without notice or obligation.

Product Details:

SPECIFICATIONS:-

• Complies with technical standards:IMO ResolutionsMSC.148(77) A.2.1, A694 (17)SOLAS Regulation IV/7.1.4ITU-R M.540-2,ITU-R M.625-3,IEC 60945-4IEC 61162-1,-2IEC 61162-2IEC 61097-6

• Receivers :-
• RxA ReceiverFrequency518 kHzRxB ReceiverFrequency490 kHzRxC ReceiverFrequency4209.5 kHz
• Sensitivity <2 microvolts
• Frequency stability +/- 10 Hz
• Antenna Input 50 ohms
• NAVTEX Reception conforms to ITU-R 540-2,IEC 61097-6
• NAVTEX message memory Stores at least 300 x 500
• Power Voltage range 12/24 V DC nominal(10.8 V to 31.2 V)
• Consumption, backlight dimmed 5.7 W @ 24 V DC Consumption, backlight full on 8.6 W @ 24 V DC Fused internally 1.8 A resettable type

Product Details:

General Specifications:-
• Frequency coverage (MHz): TX 118.000 to 136.975RX 108.000 to 136.975*1WX 161.650 to 163.275*2*1: IC-A24 only, IC-A6; 118.000 to 136.975 MHz*2: U.S.A. version only.
• Mode : 6K00A3E16K0G3E (161.65 to 163.275 MHz)
• Channel spacing : 25 kHz
• Number of memory channels : 200 (20 CH. × 10 BANK)
• Power supply requirement : Specified battery packs/case or11.0 V DC at external DC jack
• Usable temp. range : –10°C to +60°C (+14°F to +140°F)
• Current drain :Tx 1.5 A typicalRx 70 mA typical (at stand by)300 mA typical.(at AF max.)
• Antenna connector : BNC 50 Ω (nominal)
•Dimensions : 54(W)×129.3(H)×35.5(D) mm(projections not incl.) 21⁄8(W) × 53⁄32(H) × 113⁄32(D) inch
•Weight : Approx. 180 g (6.35 oz)(Without the battery pack and antenna.)

Transmitter:-
•Output power : 5 W (PEP) typical1.5 W (CW) typical
• Modulation : Low level modulation
• Modulation limiting : 70 to 100%
• Audio harmonic distortion : Less than 10% (at60 % mod.)
• Hum and noise ratio : More than 35 dB
• Spurious emissions : More than 46 dB (except operatingfrequency ±6.25 Hz range)
• Microphone connector : 3-conductor 2.5(d) mm (1/10˝)/more than 100 kΩ

Receiver:-
•Receive system : Double conversionsuperheterodyne
• Intermediate frequencies : 1st 30.05 MHz2nd 450 kHz
•Sensitivity VOR (AM 6dB S/N): Less than –3 dBμ typicalCOM (AM 6dB S/N): Less than –6 dBμ typicalWX (FM 12dB SINAD): Less than –13 dBμ typical
• Squelch sensitivity : AM Less than 0 dBμFM Less than –7 dBμ
• Selectivity : More than 7.5 kHz/–6 dB)Less than 25 kHz/–60 dB)
• Spurious response : AM More than 60 dBrejection FM More than 30 dB
• Audio output power : More than 500 mW typical(at 10% distortion with an 8 Ωload, 30% mod.)
•Noise and hum : More than 40 dB at 30% mod.
• External SP connector : 3-conductor 3.5 (d) mm(1/8˝)/8 Ω

Product Details:

General Specificatins:-
• Frequency coverage (MHz): TX 118.000 to 136.975RX 108.000 to 136.975**: IC-A24E only, IC-A6E; 118.000 to 136.975 MHz
• Mode : A3E
• Channel spacing : 25 kHz
• Number of memory channels : 200 (20 CH × 10 BANK)
• Power supply requirement : Specified battery packs/case or 11.0 V DC at external DC jack• Usable temperature range : –20˚C to +55˚C
• Current drain :Tx 1.5 A typicalRx70 mA typical (at stand by)300 mA typical(at AF maximum)
• Antenna connector : BNC 50 W (nominal)
• Dimensions : 54(H) × 129.3(W) × 35.5(D) mm(projections not included)
• Weight : Approximately 180 g(Without the battery pack and antenna.)
• Output power : 3.6 W (PEP) typical1.0W (CW) typical
• Modulation : Low level modulation
• Modulation depth : 85%
• Audio harmonic distortion : Less than 10% (at 85% ±3 dB modulation)
• Harmonics spurious emissions: Less than –36 dBm (except operating frequency ±1 MHz range)
• Microphone connector : 3-conductor 2.5(d) mm (1/10˝)/ more than 100 kW
• Frequency stability : ±5 ppmD Receiver
• Receive system : Double conversion super heterodyne
• Intermediate frequencies : 1st 30.05 MHz2nd 450 kHz
• Sensitivity VOR (AM 6dB S/N) : –3 dBμ typicalCOM (AM 12dB SINAD) : –3 dBμ typical (with CCITT)
• Squelch sensitivity : Less than 0 dBμ (Threshold)
•Selectivity : 6 dB (More than 7.5 kHz)60 dB (Less than 25 kHz)
• Spurious response : More than 70 dBrejection
• Audio output power : 500 mW typical( at 10% distortion with an 8 W load, 30% modulation)
• Hum and noise : More than 40 dB at 90% modulation
• External speaker connector : 3-conductor 3.5 (d) mm(1/8˝)/8 WAll stated specifications are subject to change without notice or obligation.

Product Details:

GENERAL:-

• Frequency coverage

* Guaranteed rangeTX: 144–148MHz,RX: 136–174MHz*TX/RX: 144–148MHz

• Number of channels 207 channels (including 6 scan edges, and 1 call)
• Type of emission F2D, F3E (FM)

• Frequency stability ±3ppm
• Power supply requirement 13.8V DC ±15%Current drain (approx.)Tx 65WRx Max. audio/Stand-by11A 1.5A/0.4A

• Antenna impedance 50Ω (SO-239)
• Operating temperature range –10°C to +60°C; 14°F to +140°F
• Dimensions (W×H×D;
• Projections not included)140×40×162 mm; 5.51×1.57×6.38 in
• Weight (approx.) 1.1 kg; 2.43lb

TRANSMITTER:-

• Output power (at 13.8V DC) 65W, 25W, 10W, 5W
• Max. frequency deviation ±5.0kHz/±2.5kHz (W/N)
• Spurious emissions Less than –60dBc
• Microphone impedance 600Ω (8-pin modular)

RECEIVER:-

• Intermediate frequencies 46.35MHz/450kHz
• Sensitivity (at 12dB SINAD) Less than 0.18μVSelectivity Wide Narrow More than 6kHz (at 6dB) Less than 14kHz (at 60dB)More than 3kHz (at 6dB) Less than 9kHz (at 55dB)
• Spurious response rejection More than 60dB
• Audio output power 4.5W typ. (10% dist. 4Ω load)
• External speaker connector2-conductor 3.5 (d) mm(1⁄8¿¿)/4Ω

Product Details:

GENERAL SPECIFICATIONS:-

• Frequency coverage 136–174MHz 350–400MHz400–470MHz450–520MHz
• Number of channels 16 channels
• Type of emission 16K0F3E/11K0F3E
• Channel spacing 12.5/25 kHz
• PLL channel step 2.5/3.125kHz 5/6.25kHz
• Power supply requirement 7.2V DC nominal
• Current drain (approx.)Tx High 1.3A 1.3ARx Max. audio 330mA (Internal SP) 330mA (Internal SP)Standby 75mA 70mA
• Antenna impedance 50Ω
• Operating temperature range –30°C to +60°C (Radio only)
• Dimensions (W×H×D) 58×111×31.0 mm (With BP-264)(Projections not included) 58×111×35.5 mm (With BP-265)
• Weight (approx.) 330g (With BP-264)270g (With BP-265)

TRANSMITTER:-

• Output power (at 7.2V DC) 5W, 2W, 1W (Hi, L2, L1) 4W, 2W, 1W (Hi, L2, L1)
• Max. frequency deviation ±5.0/±2.5kHz (Wide/Narrow)
• Frequency stability ±2.5ppm
• Spurious emissions 70dB min.
• FM Hum and noise 46/40dB typ. (Wide/Narrow)
• Audio harmonic distortion 1.0/1.5% typ. (Wide/Narrow)(AF 1kHz 40% deviation)
• Ext. microphone connector 3-conductor 2.5 (d) mm (1⁄10″)/2.2kΩ

RECEIVER:-

• Sensitivity (at 12dB SINAD) 0.25μV typ.
• Adjacent channel selectivity 78/70dB typ. (W/N) 73/65dB typ. (W/N)
• Spurious response rejection 70dB min.
• Intermodulation rejection 75dB typ. 74dB typ.
• Hum and noise 54/50dB typ. (W/N) 52/47dB typ. (W/N)(Without CCITT fi lter)
• Audio output power (at 5% distortion)
• Internal SP (With 12Ω load) 800mW typ.
• External SP (With 8Ω load) 400mW typ.
• Ext. speaker connector 2-conductor 3.5 (d) mm (1⁄8″)/8Ω

Other features:-
• DTMF autodial
• CTCSS/DTCS encoder/decoder
• BIIS PTT ID transmission
• MDC PTT ID and emergency
• Low battery alert
• 2-step power save
• PC programmable
• Time out timer
• Talk around function
• Lone worker function
• Enhanced emergency
• 3-color LED
• Surveillance function

Product Details:

FEATURES:-

• SCAN
• Follow-ME SCAN
• Encryption (option)
• Time Out Timer
• Busy Channel Lockout (BCLO)
• Rx Power Save
• ARTS
• Sub-Audio Set Mode
• Low Battery Indicator

Product Details:

Other features
• 512 memory channel with 128 zones
• 8 DTMF autodial memories
• 2 step reduced power setting
• Power on password
• Busy, repeater lockout functions
• Escalating alarm
• Mode dependent scan
• Surveillance function temporarily turns offthe LED backlight and beep sound
• Powerful 5W output both in VHF and UHF
• Flash CPU for future upgrade and more...

Frequency range :-IC-F3161T/S 136–174MHzIC-F4161T/S 400–470MHz450–512MHz
• Number of channels : 512 channels/128 zones
• Channel spacing : 12.5kHz/25kHz, 15kHz/30kHz,6.25kHz (option)
• PLL channel step : 2.5kHz, 3.125kHz
• Antenna impedance : 50Ω
• Usable temperature range : –30°C to +60°C; –22°F to +140°F
• Power supply requirement : 7.2V DC
•Current drain (at 7.2V DC; approx.):Transmit VHF/UHF 1.5A/1.8A (at 5W/5W)Receive stand-by 100mA150mA (With UT-126H)rated output 600mA
• Dimensions (with BP-232N) : 53 (W) ×136 (H) ×38.5 (D) mm;(projections are not included) 23⁄32 (W) ×511⁄32 (H)×117⁄32 (D) in
• Weight (approx.) : 340g; 12.0oz (with BP-232N)

Product Details:

GENERAL SPECIFICATIONS :-
• Frequency range :IC-F50 136–174MHzIC-F60 400–470MHz450–512MHz (U.S.A.)450–520MHz (General)
• Number of Channels : Max. 128 channels/ 8 zones
• Channel spacing : 12.5/25kHz, 15/30kHz
• Antenna impedance : 50Ω (SMA Type)
• Frequency error : ±2.5ppm
• PLL channel step :IC-F50 2.5/3.125kHzIC-F60 5/6.25kHz
• Power supply requirement : 7.2V DC
• Current drain (approx) :Transmit IC-F50 1.5A/0.7A (5W/1W)IC-F60 1.5A/0.8A (4W/1W)Receive AF max. 300mAStand-by 85mA
• Operating temperature range : –30°C to +60°C; –22°F to +140°F
• Dimensions (W × H × D) : 56 × 97 × 36.4 mm ;(projections not included) 27⁄32 × 313⁄16 × 17⁄16 in.
• Weight (approx.; With BP-227) : 280g; 9.9oz
• Output power : IC-F50 5.0WIC-F60 4.0W
• Modulation system : Variable reactance frequency modulation
• Max. frequency deviation : ±5kHz (wide)±2.5kHz (narrow)
• Modulation limiting : 60–100% of Max. deviation
• Audio harmonic distortion : 3% typ. (AF 1kHz, 40% deviation)
• Spurious emissions : 70dB Min.
• Adjacent channel power : 70dB Min. (wide)60dB Min. (narrow)
• FM Hum and Noise : 46dB typ. (wide)40dB typ. (narrow
)• External MIC impedance : 9-pin multi connector/2.2kΩ
•Sensitivity : 0.25μV typ. (at 12dB SINAD)
• Squelch sensitivity : 0.25μV typ. (at threshold)
• Adjacent channel selectivity : 75dB typ. (wide)65dB typ. (narrow)
• Spurious response : 70dB
• Intermodulation : 74dB typ.
• Hum and noise : 45dB typ. (wide)40dB typ. (narrow)
• Audio output power : 0.5W typ. at 5% distortion with an 8Ω load
• External SP connector : 9-pin multi connector/8ΩSPECIFICATIONSGENERALTRANSMITT

Product Details:

GENERAL